86-577-85983788
No. 543-5, Yongchang Road, High-Tech Industrial Park, Longwan District, Wenzhou City, Zhejiang Province, Wenzhou, Zhejiang, China
| Technical Parameters | |
| Working environments | Temperature: -30'C~+70'C(can be customized to -45'C~+85'C) |
| Relatively humidity: 95%(25'C) | |
| Pressure: 86kPa~106kPa | |
| Power Supply | Single phase: 220V 50Hz Three phase:380V 50Hz |
| Tolerance: Single phase Voltage(-15%/+10%) Three phase Voltage(±10%) | |
| Frequency(±5%), harmonic content (<5%), Direct Current (±10%) | |
| Insulation resistance | 1)Resistance between input terminal and case should be more than 20M . |
| 2)Resistance between input terminal and power supply terminal should be more than 50M . | |
| 3)Resistance between power supply terminal and case should be more than 50M . | |
| The motor insulation level | Level F(Level H is selectable) |
| Protection level | IP68(underwater 20M96hours) |
| Anti-explosion level | EXD IIBT4EXD IICT4 |
| On-Off Type | |
| Start frequency | 650 times per hour |
| Designed lifetime | Minimum maintenance-free time:30,000 times |
| Working form | Short time working type, rated run time will be 15mins(customized to 30mins) |
| Regulated Type | |
| Start Frequency | 1200 times per hour |
| Designed lifetime | No less than times |
| Working form | Intermittent periodic-type, minimum rated load sustained rate is 25% |
| Basic parameters | Basic error: ≤ ±0.1% |
| Hysteresis: ≤ 0.5% | |
| Dead zone: 0.1%~9.9% continuously adjustable | |
| Damping characteristic: undamped | |
| Input and output signal | Analogue input 4-20mADC, input impedance ≤ 250 ; |
| Analogue output4-20mADC, load resistance ≥ 750 ; | |
| Linear error ≤ 0.5%; | |
| Supply voltage: 24VDC provided by internal actuator; | |
| Actuator with a build-in servo amplifier; | |
| Input and output signal channel take optoelectronic isolation | |
| Passive junction capacity: 250V/5A AC; 30V/5A DC. | |
